RLA Polymers Max SMP Clear Adhesive/Sealant

 PLEASE NOTE EXPIRY DATE IS AUG 2024

pLEASE NOTE COLOUR IS CLEAR,

About this item

MAX SMP Clear cures to provide a flexible, clear seal. The transparent properties of MAX SMP Clear make it ideal for use in the sealing/bonding of glass elements in a wide range of interior applications where a clear bond is required.

Typical uses include bonding glass panes to aluminium or anodised frames. This adhesive is compatible with metals and most materials used in construction work.

FEATURES

• A high strength, clear flexible adhesive/sealant that bonds and seals at the same time
• Internal Use
• Permanently Elastic
• No Isocyanates
• Can be applied to damp surfaces
• Low VOC

ADVANTAGES

• A clear polymer sealant ideal for bonding
• Advanced SP polymer formulation – a green alternative to traditional PU adhesives
• Does not contain solvents or isocyanates
• Excellent adhesion to a wide range of materials including metals, glass, PVC and concrete

APPLICATION INSTRUCTIONS

Substrates
Most building substrates. For example, treated wood, PVC, plastics, etc.

Preparation
Always carry out a test to confirm compatibility prior to use. Surfaces to be bonded must be clean, dry, dustproof and degreased. Application Cut off end of thread with a sharp knife, avoiding damage to the thread. Trim the nozzle to the required diameter. Ensure good contact between the joint surfaces before applying adhesive. Apply a bead of adhesive to one or both surfaces. For larger bond areas, spread the adhesive immediately using a notched spreader.

Bring the two components together immediately and hold together for at least 5 minutes until sufficient bond strength has developed. Sufficient working strength will normally develop after 5-10 minutes.